Accessories and spare parts

To help you with the construction or maintenance of your project, we offer you this complete range of accessories and spare parts below. Here you will find, for example, our variable power supplies, magnet detectors and other interesting products.


SO-1: Magnet viewer

RRP: €7,00

  • Magnet viewer to locate the magnets in the Magnorail chain through the road surface.
  • Very useful, Magnet viewer is an essential piece of equipment especially if using the non-standard bicycles like the tandem, cargo bike and ice-cream vendor. The Magnorail Viewer enables you to see the sequence of magnets under your roadbed allowing for correct placement of your bicycles but also locating track magnets for your vehicles.

SO-2: Transparent wheel

RRP: €5,50


SO-3: Set of magnets (12 pieces)

RRP: €5,00

  • 4x cube
  • 4x cylinder
  • 4x disc

SO-4: Pair of ‘O’ rings (2 pieces)

RRP: €6,50


SO-6: Variable power supply 220V/1-12V DC 2A and screw connector

RRP: €25,50

• This power supply has an Output with a voltage variator from 1 to 12V in direct current for a max current of 2A. A green LED indicates the voltage level. This is the essential accessory to power your magnorail system if you do not already have a transformer.

• Practical with its screw connector included, it will be perfect to power one or more motors of the Magnorail system or any other animation equipped with a 12 V DC motor, as well as LED model lights.


SO-7: Variable power supply 220V / 1-12V CC 2A with US plug

RRP: €25,50

• This power supply has an Output with a voltage variator from 1 to 12V in direct current for a max current of 2A. A green LED indicates the voltage level.

Be careful, this power supply can be used only for American market and is designed to power one or more Magnorail system motors or any other animation equipped with a 12 V DC motor.


SO-9: Track cover supports for motor module

RRP: €5,40

NEW !

• Track cover supports made of 8 mm thick MDF wood, adapted to the height of the track, to facilitate the laying of a covering.

• Contains 2 parts specially designed to surround the motor module.

• Perfectly suited to motor modules supplied individually (Uma-2, Umb-2, Umc-2) as part of an extension. It also complements the SO-11, SO-12 and SO-13 references for a complete expert set (BF-2, BS-2, BV-2).


SO-10: Track cover supports for Basic Set

RRP: €13,30

NEW !

• Track cover supports made of 8 mm thick MDF wood, adapted to the height of the track, to facilitate the laying of a covering.

• Contains 2 pieces to surround the motor module and 34 small pieces to follow the curves of the flexible track (14 pieces with a low opening and 20 pieces with a high opening).

• This reference is specially designed to cover the entire track length of a basic set (95 cm).


SO-11: Track cover supports 60 cm Straight Line

RRP: €7,60

NEW !

• Track cover supports made of 8 mm thick MDF wood, adapted to the height of the track, to facilitate the laying of a covering.

• Contains 6 long elements for straight sections and 6 short elements. Ideal for creating clean, perfectly aligned straight lines.

• This reference is specially designed to cover 60 cm of track, the equivalent of a UE-1 extension. It also covers 1/3 of the Expert Sets (BF-2, BS-2 and BV-2), which each include 3 x 60 cm of track.


SO-12: Track Cover Supports 60 cm Curve

RRP: €10,20

NEW !

• Track cover supports made of 8 mm thick MDF wood, adapted to the height of the track, to facilitate the laying of a covering.

• Contains 24 small pieces to follow the curves of the flexible track (12 pieces with a low opening and 12 pieces with a high opening).

• This reference is specially designed to cover 60 cm of track, the equivalent of a UE-1 extension. It also covers 1/3 of the Expert Sets (BF-2, BS-2 and BV-2), which each include 3 x 60 cm of track.


SO-13: Track Cover supports 60 cm Mixed

RRP: €9,10

NEW !

• Track cover supports made of 8 mm thick MDF wood, adapted to the height of the track, to facilitate the laying of a covering.

• Contains 4 long elements for straight sections, 6 short elements with low opening and 9 short elements with high opening, allowing you to create 20 cm in a straight line, 20 cm in a bend, and the remaining portion adjustable to your layout.

• This reference is specially designed to cover 60 cm of track, the equivalent of a UE-1 extension. It also covers 1/3 of the Expert Sets (BF-2, BS-2 and BV-2), which each include 3 x 60 cm of track.


SO-14: Track Cover Supports 60 cm Double Straight Line

RRP: €8,90

NEW !

• Track cover supports made of 8 mm thick MDF wood, adapted to the height of the track, to facilitate the laying of a covering.

• Contains 6 long and short elements on the sides, and 3 long and short elements in the centre, specially designed to reproduce an HO-scale two-way road.

• Can be used to cover a 60 cm double track, i.e. two UE-1 extensions.

Magnorail accessories